These MX5 Arms solve the clearance issues faced after fitting modified steering knuckles. By using OEM factory fit bushes and balljoints the choice is yours regarding poly bushes or OEM rubber with the added bonus of not needing cheap consumable rose joints that give a harsh unforgiving ride and need replacing every few weeks. What's not to love?
1. No more rubbing of the wheel against the lower arm on full lock
2. No need for shortened tie rods unless using the innermost notch for the ball joint.
3. Dramatically stronger than OEM arms - many of which are getting past 20 years old and rusty as hell!
4. Over -10 degrees camber achievable with OEM ball joints - even more when using extended ball joints too!
Also by having the camber separately adjustable you regain control of your caster without sacrificing camber preference.
Extension options go from:
Position 1 = standard length
Position 2 = +15mm
Position 3 = +30mm
This is PER-SIDE
The pictures show a 14" 10j wheel with no spacer to give you an idea of clearance.
Bushes and balljoints are currently not included as we are looking into suppliers.
Total weight is just under 9kg for both
NOT FOR ROAD USE